Variacija PLA Original – 1
Reviews
Buy more, save more
- Fast and precise hyper-speed printing (≤1000 mm/s)
- Reliable and consistent results
- Excellent layer adhesion
- High water, chemical, and UV resistance
- Also available as REFILL
Price range: 11,34 € through 189,90 €
100% RISK FREE PURCHASE
FREE SHIPPING OVER 80€
FinishXpert Filler Spray – Advanced surface finishing for 3D prints
FinishXpert Filler is an advanced filling spray specifically developed to improve the surface quality of 3D printed parts. Designed to work with a wide range of thermoplastic materials used in FFF and FGF technologies, this innovative formula delivers consistent, high-quality results with a filling capacity of approximately 15–30 microns per coat.
The spray comes in an elegant RAL 7042 grey and is easy to sand, making it ideal for smoothing prints produced with standard settings such as 0.2 mm layer height and 0.4 mm nozzle
High filling power for smoother surfaces
FinishXpert Filler creates a uniform surface layer that helps reduce visible layer lines and correct imperfections. By applying 2–3 coats with intermediate sanding, you can achieve a significantly smoother and more refined finish.
The process is simple: apply a coat, sand the surface, and repeat if necessary until the desired smoothness is achieved.
Wide material compatibility
This spray is designed for versatility and works effectively with a broad range of materials, including: PLA, ABS, PET, PETG, PP, PA and other common thermoplastics used in FFF/FGF printing.
It is also suitable for parts produced using:
SLS technology (PA12 / PA2200)
SLA photopolymer resins
In all cases, it helps reduce surface roughness, improve rigidity, and create a surface that is easier to sand and refine.
Perfect base for painting
FinishXpert Filler not only smooths the surface but also acts as an excellent primer layer. It improves paint adhesion and prepares the object for further finishing steps.
It can also be combined with other fillers, such as FinishXpert grey putty, to achieve even higher levels of detail and surface quality.
PETG Hyper Speed – Print Faster Without Compromise
High speed
≤1000mm/s
Reliable and
consistent results
Excellent layer
adhesion
High water, chemical
and UV resistance
PETG is best for
Functional Parts
Brackets, enclosures, mounts, tools, replacement parts
Outdoor use
Garden tools, signs, weather-resistant housings
Water Resistant objects
Pump parts, fittings, floats, waterproof casings
Electronic enclosures
Heat-resistant housings, battery cases etc.
01 GET TO KNOW
PETG Hyper Speed
PETG Hyper Speed is designed for fast, reliable, and high-quality 3D printing. Engineered for hyper-speed performance, it maintains strong layer adhesion, durability, and smooth surface quality, even at printing speeds up to 1000mm/s. It combines the toughness of ABS with the printability of PLA, making it tougher than PLA and ideal for functional and mechanical parts. Its chemical, moisture, and temperature resistance ensure long-lasting performance, while slight flexibility helps prevent brittle failures.
02 HELPFUL REMINDERS
Tips & tricks
1. Keep PETG dry
PETG can absorb moisture from the air. If it gets wet, your print may have strings, bubbles or rough spots. Store it in a sealed bag or dry box, and dry it before printing if needed.
2. Don’t press it into the bed
PETG sticks strongly to the print bed. If the nozzle is too close, the first layer can look rough or be hard to remove. Leave a little more space than you would with PLA.
3. Use medium cooling
PETG does not like too much or too little cooling. Too much fan can make layers weaker, while too little can make details messy. Start around 30–50% fan speed.
4. Adjust retraction for strings
PETG can leave thin strings between parts of the print. If this happens, try a little more retraction, faster travel moves or a slightly lower printing temperature.
5. Find the right temperature
If the temperature is too high, PETG can make blobs and strings. If it is too low, layers may not stick well together. Start with the recommended settings and adjust slowly.
6. Use glue as a release layer
PETG can sometimes stick too strongly to smooth PEI or glass. A thin layer of glue stick can help protect the build plate and make the print easier to remove.
03 HOW TO PRINT
Tips & tricks
TESTED WITH XY PRINTER PRINTING SPEED
≤1000 MM/S
NOZZLE
TEMPERATURE
220°C
BED
TEMPERATURE
60°C
CHAMBER
TEMPERATURE
60°C
HEAT DEFLECTION TEMPERATURE
XY
RETRACTION
LENGTH
0.6 MM
04 TDS
Technical Specifications
Here are some of our top printing recommendations to help you get the best results possible.
|
MAX FLOW RATE / TESTED ON H2S WITH 0.4MM STANDARD FLOW NOZZLE |
30°C |
|
DRYING TEMPERATURE |
60°C |
|
DRYING TIME |
8H |
|
VICAL SOFTENING TEMPERATURE |
XY |
|
ENCLOSED PRINTER |
RECOMMENDED |
Compatible with
REFILLS. Simple. Compatible. Sustainable.
All our filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.
AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.
Start printing in just 3 simple steps:
1 Unbox
Unbox a set of two highly durable and reusable discs.
2 Install
Align the discs with the rectangular hole and press down on both sides.
3 Enjoy
Remove the secure tape and start printing.
Any last questions?
Here are some of the most common questions related to PETG material. If you need help with anything else, feel free to contact us! We are real people, and we are happy to help.
Money Back Guarantee.
You have nothing to worry about. If you aren’t satisfied with your products, we offer a 30-day risk-free guarantee. You can get a full refund.
Makers also bought
